27 Inch Burnishing Pad for High-speed Burnishers
Advantages
Special fiber base to make a mirror finish.
It has a longer lifetime
Using of both side reducing the cost.
Removing scratches fast.
Mechanical cleaning and polishing with water only, and no chemicals required.
Application
It is good for cleaning on resilient floors, wooden, concrete, terrazzo, and other stone floors.
The typical application is wet use under scrubbers and other low-speed floor machines. It can be used as a separate step or a system solution from 400 grit to 3000 grit to do scrubbing, buffing, polishing and daily maintenance.
It is available for cleaning on concrete, terrazzo, resilient floor and stone floor.
|
Red (400#) |
It is for heavy-duty stripping and intense removal of stains as a preparation step. |
|
White (800#) |
It is for removing most tiny scratches and leaving a well prepared surface. |
|
Yellow (1500#) |
It is for leaving a very well prepared and satin surface. |
|
Green (3000#) |
It is for bringing mirror finishing and daily maintenance. |
Maintenance of Pad
Remove pad from machine after each use and wash them;
Hang up for drying before use. Do not use pad while it's dirty.
Specifications
|
Item no. |
Diameter Inch/mm |
Grit |
|
ESR*S# |
6.5"/165mm-27"/685mm |
400-3000# |
|
EHR*S# |
6.5"/165mm-27"/685mm |
400-3000# |
