Burnishing Pads For Polished Concrete

The maintenance pad is adapt to all different floor types, all floor case tasks, and all floor cleaning and polishing machines. The diamond pad will leave a high gloss and clarity compared to the traditional pad in the market. The maintenance pad provides an environmentally friendly cleaning and polishing choice. It is a new trend in the cleaning industry.

Usage: Wet

Equipment:

Scrubber dryer machine

Single disc machine with 150-400 RPM

Orbital machine

High-speed burnisher up to 3000 RPM (Green Pad Only)

Send email to us Downland Ashine catalogue

Product Detail

Product Tags

Details

Advantages

Eco friendly and Healthy. With water only, it can clean and polish all floors.
(Green chemicals also available if necessary)

Longer-lasting and higher clarity and gloss. According to the test of our engineer, the maintenance pad will increase the gloss and clarity level by daily use. Before and after using the maintenance pad, the gloss and clarity increased 10 degrees in our test.

Fit for all floor cleaning and polishing machines.

Safer. Provide a more slip-resistant floor after cleaning. The maintenance pads are widely used in hospitals, supermarkets, big-box, etc. Daily care using the maintenance pad can keep the floor clean and ensure the ground will not slip.

Cost-saving on consumables, time, and labor compared with traditional floor pads.

Application

Red Pad - Coarse 1#: For deep cleaning, removing deep scratches and stains to leave a clean and well-prepared surface.

White Pad - Medium 2#: For scrubbing, to remove small scratches and leave a matte-finish look.

Yellow Pad - Fine 3#: For floor maintenance, to leave a satin-finish look.

Green Pad - XFine 4#: For polishing, burnishing or daily cleaning, to leave a high gloss end. Use it on a daily basis, the clarity and shine of the floor will increase and stay longer.

The maintenance pad is available for using as a kit solution or a separate step.

Maintenance of Pad

Rinse the pads thoroughly with water after each use. During the maintenance process, the pads need to be kept clean. Otherwise, the remaining stains on the pads will remain on the ground during the operation of the machine, making the ground conditions worse. Therefore, you should make sure that the mat is clean every time you use the mat.